← EAC Research / EAC 研究

Stress corrosion crack initiation in machined type 316L austenitic stainless steel in simulated pressurized water reactor primary water

Litao Chang、M. Grace Burke、Fabio Scenini

Abstract / 摘要

The effect of machining on stress corrosion crack initiation of annealed Type 316L stainless steel was in-vestigated through accelerated testing in high-temperature hydrogenated water. It was observed that stress corrosion cracks only initiated on machined surfaces with machining marks perpendicular to the loading di-rection and a porous inner oxide layer was identified as an important factor contributing to crack initiation. Furthermore, most cracks stopped within the machining-induced near-surface ultrafine-grained layer and the machining-induced residual stresses did not appear to have a significant effect on crack initiation. A correlation between crack initiation and the surface/near-surface features is identified and discussed.