← EAC Research / EAC 研究

An approach for obtaining mechanical property of austenitic stainless steel by using continuous indentation test analysis

He Xue、Jinxuan He、Wenna Jia、Jianlong Zhang、Shuai Wang、Shun Zhang、Hongliang Yang、Zheng Wang · 2020

Ball indentation test;Austenitic stainless steel

Abstract / 摘要

It is importance to understand the accurate material mechanical property of local area with ffaws in the structure integrity evaluation, and the plastic hardening induced by the welding or other processing would induce the change of the mechanical property of the local area in structures. To understand and obtain heterogeneous material mechanical properties in the welded joint or other local region in the core structure of nuclear power plants, a group tests of tensile work hardening and continuous ball indentation, combining with inversion analysis by using the ffnite element method, are used to obtain the local mechanical properties of nuclear grade 316L austenitic stainless steel, and an approach to obtain the stress–strain relationship of the stainless steel material during the plastic deformation stage under different elongations is developed based on the represen-tative stress–strain method in this paper. The investigated results indicates that the related mechanical param-eters of 316L austenitic stainless steel increase with different elongations, and the deviations of the yield strength and the tensile strength values are both within 6%. It provides a reasonable and effective method to obtain the actual material mechanical property of the local area in important structures.

Conclusions / 结论

1- The establishment of a three-dimensional model of indentation test by ffnite element simulation can better simulate the continuous indentation test and accurately obtain the indentation load-depth curve of 316L austenitic stainless steel at different elongations. The true stress–strain curve obtained by the uniaxial tensile test ffts well, and the correlation coefffcient R2 reaches above 0.97. 2- As the elongation of stainless steel increases, both its yield strength and tensile strength increase, indicating that the material is affected by the degree of work hardening, which enhances its ability to resist plastic deformation and increases its strength. 3- Compared with the uniaxial tensile test, the relative error of the strength performance parameters of 316L stainless steel material calculated by the continuous indentation test is relatively small. For the limits of destructive application of the traditional material tensile test, micro-indentation testing techniques provide a basis for the engineering use of the indentation method to detect the precise mechanical properties of in-service equipment materials. 4- It provides a reasonable and effective integrity assessment to obtain the structural failure driving force (such as the stress and strain) and the structural failure resistance (such as the material mechanical properties) of the hot or cold working areas like as joint wield in key structures.